Bi-amping and tri-amping is the practice of using two or three audio amplifiers to amplify different audio frequency ranges, with the amplified signals being routed to different speaker drivers, such as woofers, subwoofers and tweeters. Biamping can be done with a single power amplifier if the device has more than one amplifier, as the case with a stereo power amp. Triamping cannot be done with a stereo power amp; a mono power amp would need to be added or a home theatre receiver (often 5 or more amplifiers) could be used. With bi-amping and tri-amping, an audio crossover is used to divide a sound signal into different frequency ranges, each of which is then separately amplified and routed to separate loudspeaker drivers. In some bass amplifiers using bi-amping, the woofer and horn-loaded tweeter are in the same speaker enclosure. In some bi-amp set-ups, the drivers are in separate speaker enclosures, such as with hone stereos that contain two speakers and a separate subwoofer.
Video Bi-amping and tri-amping
Description
"Bi-amping" is the use of two channels of amplification to power each loudspeaker within an audio system. "Tri-amping" is the practice of connecting three channels of amplification to a loudspeaker unit: one to power the bass driver (woofer), one to power the mid-range and the third to power the treble driver (tweeter). The terms derive from the prefix bi- meaning 'two', tri- meaning 'three', and amp the abbreviation for "amplifier".
Crossover
It differs from the conventional arrangement in which each channel of amplification powers a single speaker. Bi-amping typically consists of a crossover network and two or more drivers. With ordinary loudspeakers, a single amplifier can power the woofer, mid-range and tweeter through an audio crossover, which filters the signal into high- medium- and low-frequencies (or high- and low-frequencies in 2-way speakers) - a mechanism that protects each driver from signals outside its frequency range. However, the passive crossover itself is inefficient, so splitting the frequencies electronically before these are amplified is a way to avoid this problem. In such a case, an amplifier each powers a frequency range determined by an active crossover to each of the drive units. The technique is primarily used in large-scale audio applications such as sound amplification for concerts, in portable powered speakers and by hi-fi enthusiasts.
Wiring
A speaker system has to be wired to accommodate either configuration, typically with two sets of binding posts, one set for the bass and one set for the mid-highs. A single amplifier can usually power a woofer and a tweeter only through a post-amplifier crossover filter, which protects each driver from signals outside its frequency range.
Bi-amping of speakers requires double the channels of amplification and can be accomplished using two ordinary amplifiers in either a vertical or horizontal arrangement.
- Horizontal bi-amping uses one amplifier to power both bass drivers (woofers) and the second amplifier to power both treble drivers (tweeter) or the midrange and treble drivers together. Horizontal bi-amping has the advantage of allowing two different amplifiers that sound better than each other for bass or for treble.
- Vertical bi-amping uses two channels of an amplifier per loudspeaker, with a dedicated channel for the bass driver and a dedicated channel for the treble or the treble and the midrange post-amplifier together. Vertical bi-amping has the advantage of not having to use a single amp to power both bass sections, which can be very taxing on the amplifier, especially at higher volume or if the bass driver has a particularly low impedance at certain frequencies.
Benefits
Most audible differences are subtle. If at all noticeable, benefits of bi-amping cannot be realized if passive crossover networks of a speaker system are not removed. Benefits include transients are less likely to cause amplifier overload (clipping) and/or speaker damage, and reduced intermodulation distortion, elimination of errors introduced by low frequency passive crossover, reduction of load presented to the power amplifier, better matching of power amplifier and speaker driver and others.
Maps Bi-amping and tri-amping
See also
- Active crossover
- Bi-wiring
- Powered speakers
References
Source of the article : Wikipedia
0 Comments